J+J Automation UK Limited

Electric Stainless Steel 3 Way 6000psi Ball Valve

Electric Stainless Steel 3 Way 6000psi Ball Valve

Electric Actuated 3 Way 6000psi Stainless Ball Valve On Off :

  • Overview - The UK manufactured reduced bore stainless steel high pressure ball valve with BSPP female treaded end connnections is available as a 3 way L port for diverting duties or a 3 way T port for diverting or mixing duties. J3CS electrical acxtuator mounted via a stainless steel bracket and drive adapter.Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
  • Sizing Criteria - J3CS Electrical on off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Available L port or T port. Available as a bottom entry valve. BSPT, NPT or compression ends.


Electric Actuated 3 Way 6000psi Stainless Ball Valve Failsafe :

  • Overview - The UK manufactured reduced bore stainless steel high pressure ball valve with BSPP female treaded end connnections is available as a 3 way L port for diverting duties or a 3 way T port for diverting or mixing duties. J3CS electrical acxtuator mounted via a stainless steel bracket and drive adapter.Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
  • Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 6000psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Available L port or T port. Available as bottom entry valve. Can be configured fail open, or fail closed. BSPT, NPT or compression ends.


Electric Actuated 3 Way 6000psi Stainless Ball Valve Modulating :

  • Overview - Electrically actuated modulating reduced bore high pressure 6000psi stainless steel 3 way ball valve, ends BSPP,
  • Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
  • Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Available L port or T port. Available as a bottom entry valve. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. BSPT, NPT or compression ends.


Electric Actuated 3 Way 6000psi Stainless Ball Valve Failsafe Modulating :

  • Overview - The UK manufactured reduced bore stainless steel high pressure ball valve with BSPP female treaded end connnections is available as a 3 way L port for diverting duties or a 3 way T port for diverting or mixing duties. J3CS electrical acxtuator mounted via a stainless steel bracket and drive adapter.Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
  • Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Available L port or T port. Available as bottom entry valve. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. BSPT, NPT or compression ends.