J+J Automation UK Limited

Electric Stainless Steel 3 Piece V Control Ball Valve

Electric Stainless Steel 3 Piece V Control Ball Valve

Electric Actuated Stainless V Control Ball Valve On Off ;

  • Overview - This full bore 3 piese stainless steel V control ball valve is designed to provide more accurate flow control compared to a standard ball valve in modulating applications. 2 Way ball valve with 30, 60 or 90 degree V-notched ball, reinforced PTFE seats and PTFE seals. BSP end connections (other options available). Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
  • Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - 30, 60 or 90 degree V ball. Socket or butt-weld ends. Max +130C service using a mounting kit.


Electric Actuated Stainless V Control Ball Valve Failsafe :

  • Overview - This full bore 3 piese stainless steel V control ball valve is designed to provide more accurate flow control compared to a standard ball valve in modulating applications. 2 Way ball valve with 30, 60 or 90 degree V-notched ball, reinforced PTFE seats and PTFE seals. BSP end connections (other options available). Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
  • Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Can be configured fail open, or fail closed. 30, 60 or 90 degree V ball. Socket or butt-weld ends. Max +130C service using a mounting kit.


Electric Actuated Stainless V Control Ball Valve Modulating :

  • Overview - This full bore 3 piese stainless steel V control ball valve is designed to provide more accurate flow control compared to a standard ball valve in modulating applications. 2 Way ball valve with 30, 60 or 90 degree V-notched ball, reinforced PTFE seats and PTFE seals. BSP end connections (other options available). Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
  • Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact usto confirm the correct actuated ball valve for your particular application.
  • Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. 30, 60 or 90 degree V ball. Socket or butt-weld ends. Max +130C service using a mounting kit.


Electric Actuated Stainless V Control Ball Valve Failsafe Modulating :

  • Overview - This full bore 3 piese stainless steel V control ball valve is designed to provide more accurate flow control compared to a standard ball valve in modulating applications. 2 Way ball valve with 30, 60 or 90 degree V-notched ball, reinforced PTFE seats and PTFE seals. BSP end connections (other options available). Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
  • Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. 30, 60 or 90 degree V ball. Socket or butt-weld ends. Max +130C service using a mounting kit.