J+J Automation UK Limited

Electric Stainless Steel 2 Way 6000psi Ball Valve

Electric Stainless Steel 2 Way 6000psi Ball Valve

Electric Actuated 6000psi Stainless Ball Valve On Off :

  • Overview - Electrically actuated on-off reduced bore high pressure 6000psi stainless steel 3 piece ball valve, 2 way, ends BSPP,
  • Function - The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 600psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - BSPT, NPT or compression ends.


Electric Actuated 6000psi Stainless Ball Valve Failsafe :

  • Overview - The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
  • Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 6000psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - BSPT, NPT or compression ends. Can be configured fail open, or fail closed.


Electric Actuated 6000psi Stainless Ball Valve Modulating :

  • Overview - The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
  • Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 600psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - BSPT, NPT or compression ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power.


Electric Actuated 6000psi Stainless Ball Valve Failsafe Modulating :

  • Overview - The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
  • Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 600psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - BSPT, NPT or compression ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power.