J+J Automation UK Limited

Electric Stainless Steel 2 Piece Ball Valve

Electric Stainless Steel 2 Piece Ball Valve

Electric Actuated Stainless 2 Piece Ball Valve On Off :

  • Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way 2 piece full bore stainless ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire. A
  • Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
  • Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Max +130C service using a mounting kit.


Electric Actuated Stainless 2 Piece Ball Valve Failsafe :

  • Overview - The 2 piece stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a wide variety service applications. 2 Way full bore stainless ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
  • Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Can be configured fail open, or fail closed. Max +130C service using a mounting kit.


Electric Actuated Stainless 2 Piece Ball Valve Modulating :

  • Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way 2 piece full bore stainlessball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
  • Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.


Electric Actuated Stainless 2 Piece Ball Valve Failsafe Modulating :

  • Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a wide range of service applications. 2 Way 2 piece full bore stainlessball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
  • Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
  • Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
  • Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.